by chaos » Tue Dec 01, 2009 4:09 am
No it isn't, so I will tell you how to do it.
1. Make 2 walls, they can be on any angle, but I suggest trying a horizontal one first
2. Make wall #2 much shorter on the blue axis (up and down) than #1
3. Scale wall #2 either using arbitrary scale and typing in a small decimal number (not sure which number would work for this) or scale it using the scale tool until it is very very thin, it must be about 1/6th of a unit thin
4. Place wall #2 so that it is partly in wall #1 and partly out. When you jump into wall #1 in game, you will stick to wall #2 and animation glitch
If you just stand on the wall without glitching here are the most likely causes:
1. your wall is not partly in and partly out
2. your wall is too wide, make it thinner